7.5.4 To install the belt tensioner
1. Install the belt tensioner in the housing.
2. Install the belt tensioner stop.
3. Apply grease around the O-ring.
Grease: Molykote W2 Multipurpose grease.
7.6 Primary belt
7.6.1 To remove and install the primary belt
1. Remove the primary belt from the housing.
2. Install in opposite sequence.
Note: Make sure that the drive belt ribs align with the
grooves on the pulley.
950 - 001 - Repair and servicing - 37
To Next Page
Loading...
