212 Chapter 11 Finding and Recording Places
4. When the GPS position is displayed on the screen, you can now
take a photo of your place of interest.
Before taking a photo, you can:
Change brightness and white balance settings. Tap Menu >
Brightness or White Balance, and choose a setting.
Set Footprints to separately save a large, high-resolution photo.
Tap Menu > Settings and select the Save a large photo in Albums
during capture check box.
•
•
5. Tap the Virtual Camera button ( ) to take the photo.
6.
Footprints then displays the captured photo, with several buttons
at the bottom of the screen that allow you to do the following:
54321
7. Tap Done.
The footprint is automatically named with the location name, city, or
country where the photo was taken. If the location, city or country