Chapter 12 Camera and Multimedia 225
also press and hold the Virtual Camera button to refocus and then
capture the photo or video.
To capture a photo or video using Auto Focus
Auto Focus sets the focus on the subject at the center of the screen.
Auto Focus is available for all capture modes.
Press and hold the Virtual Camera button to set the focus and
take a photo.
Press and hold the Virtual Camera button to set the focus and
start capturing a video. Press the button again to stop capturing.
To take a photo using Touch Focus
Touch Focus allows you to focus on a particular area of the screen by
touching it. Touch Focus is enabled by default and is available in the
Photo and Contacts Picture capture modes.
1.
Set the capture mode to Photo or Contacts Picture mode.
2.
Tap the area on the screen where you want to focus. The focus
indicator positions itself on the selected area.
If you tap outside the effective focus area, a white box appears
to indicate the area where you can use Touch Focus.
3. Press and hold the Virtual Camera button to set the focus and
take a photo. You can also directly press and hold the area you
selected (that is, the area enclosed within the focus indicator) to
focus on that area and take a photo.
To capture photos in Panorama mode
Press and hold the Virtual Camera button to set the focus and capture
the first photo. Press and hold the button again to focus and capture
each subsequent photo and complete the panorama.
•
•
To Next Page
Loading...
