HTC One max - Page 195

§ If the TV didn't turn on, tap No. HTC One max will try another
remote control profile.
§ If a matching remote control profile isn't found, you'll need to
manually set up the remote control.
Customizing the remote control buttons
Are the predefined buttons not to your liking? You can change any button.
To avoid conflict with the EPG, it is recommended to not change
any of the buttons on the Number pad tab.
1. Open the TV app.
2. Tap > > Button setup.
3. Tap a button to configure.
Red buttons (except for the Record button) have not been
configured.
4. Align the IR port on HTC One max with the IR port on your device's
remote control. Your HTC One max and your device's remote
control should be less than 5 cm apart.
5. On your device's remote control, press and hold the button you
want to add to HTC One max.
6. Tap the blinking onscreen button to test the button.
7. Tap Yes to finish setting up the button.
Fun and entertainment 195