To Next PageTo Next PageWhat to do if my HTP Water Heater's supply water has high sulfate or mineral content?
If the supply water has high sulfate or mineral content in your HTP Water Heater, consult a water quality specialist in your area to analyze your water supply. Address any water quality issues based on the specialist's recommendations.
What to do if the circulator is not operating in my HTP Water Heater?
If the circulator in your HTP Water Heater is not operating, you should check it or replace it.
What to do if the wiring is incorrect in my HTP Water Heater?
If the wiring is incorrect in your HTP Water Heater, you should check the wiring.
What to do if there is a tank control failure in my HTP SSC?
If there's a tank control failure in your HTP Water Heater, replace the control.
What to do if there is a circulator failure in my HTP Water Heater?
If there's a circulator failure in your HTP Water Heater, replace the circulator.
What to do if there is a zone valve failure in my HTP SSC?
If there's a zone valve failure in your HTP Water Heater, replace the valve.
What to do if the zone valve is not opening on my HTP Water Heater?
If the zone valve is not opening on your HTP Water Heater, open it manually to replace it.
General| Category | Water Heater |
|---|---|
| Brand | HTP |
| Series | SSC |
| Power Source | Electric |
| Thermostat | Adjustable |
| Material | Stainless Steel |
| Voltage | 120V, 208V, 240V |
| Safety Features | pressure relief valve |
Covers general plumbing requirements and best practices for water heater installation.
Details how to properly connect the water heater to the boiler system.
Explains connection procedures for the domestic cold water supply.
Describes the process for connecting the hot water outlet.
Instructions for installing and maintaining the T&P relief valve for safety.
Safety information and recommendations to prevent scalding injuries from hot water.
Importance and sizing of expansion tanks for potable water systems.
Guidelines for sizing circulators based on pressure drop calculations.
Illustrates various system configurations and their applications.
Information about the water heater's control system and settings.
Guidelines for electrical wiring installation and safety precautions.
Detailed schematic diagrams for electrical connections and zoning.
Outlines the owner's duties for warranty validity and system maintenance.
Lists conditions and circumstances not covered by the manufacturer's warranty.
Details cost responsibilities for warranty claims and service.
Explains the scope and limitations of warranty coverage and owner remedies.
