Huawei 5288 V5 - Querying Server Component Information

Test Networking
Diagram
See section 2.1 Network Diagram.
Prerequisites You have logged in to the iBMC WebUI.
Procedure 1. On the iBMC WebUI, choose Power > Power Control.
2. Click the virtual power buttons in the right pane to power on
or off the server remotely.
Expected Results The server is remotely powered on and off.
Test Result
Remarks
4.2.5 Querying Server Component Information
Case No.
4.2.5
Test Objective To verify that you can query server component information on
the iBMC WebUI.
Test Networking
Diagram
See section 2.1 Network Diagram.
Prerequisites You have logged in to the iBMC WebUI.
5288 V5 Server
Acceptance Guide
4 Test Cases and Records
Issue 03 (2019-03-25) Copyright © Huawei Technologies Co., Ltd. 17