Procedure 1. Copy the stress-1.0.0software package to the server.
2. Go to the root directory of stress-1.0.0 and run the following
commands:
#chmod –R 755 configure
#./configure
#make install
3. Run the following command in the src directory:
./stress -c n -t 43200
n indicates the number of virtual cores of the server.
4. Check whether the OS is operating properly after the 12-hour
test.
Expected Results The OS is operating properly, and no error is recorded in the log
Test Result
Remarks
5288 V5 Server
Acceptance Guide
4 Test Cases and Records
Issue 03 (2019-03-25) Copyright © Huawei Technologies Co., Ltd. 21
To Next Page
Loading...
