The wireless mode is on. To turn it o, press and keep pressed the
WLAN button on the side of the ADSL2+ Router until the WLAN LED
on the top part of the ADSL2+ Router goes o. To turn the wireless
mode on, press and keep the same button pressed for more than
1 second. The WLAN LED will go on.
If you need to reset the factory settings of the ADSL2+ Router, rst
make sure the router is on. Press and keep the RESET button on the
back of the ADSL2+ Router pressed until all LEDs (except the Power
LED) go o.
Wait until the ADSL2+ Router LEDs come back on. Resetting the
factory settings will clear any information entered and saved in the
ADSL2+ Router.
If you wish to change your User name and Password (you can change the User name only once,
but you can change the Password as many times as you wish), open your Browser and on the
address bar type http://www.oteshop.gr/myservices/myid
In the page that will open under MY e-SERVICES
or Internet Services Administration click on
Change of conn-x username and password and
follow the instructions on the screen.
If you change the User name or the Password, repeat the Internet Settings.
To Next Page
Loading...
