Huawei HG530

The ADSL2+ Router has the following buttons and ports (Figure 2):
PORT LABEL DESCRIPTION OPERATION
POWER Power Port
This port is used for
the 220V power transformer
RESETFactory setting reset button Resets factory settings
LAN 4 (STB) Ethernet Port for decoder
Connects to OTE’s Cable Television
over Internet Service
LAN 1-3 Ethernet Ports
for PC connection
They allow for the connection of
up to three PCs for access to the Internet
and local network creation
ADSL
Port for telephone
cable connection
Connects to the telephone socket
or the splitter
WLAN WLAN Button It turns the WLAN on/o
ON/OFFPower button It is used to power the device on/o
Figure 2
Follow the following instructions to connect the ADSL2+ Router
over a PSTN or ISDN telephone line.
Connecting the ADSL2+ Router
Ports
Connecting the ADSL2+ Router