LED
The following LEDs are found on the front side of the ADSL2+ Router.
Review the meaning of each LED below (Figure 1).
Color Status
On
Figure 1
O
Blinking
On
O
Blinking
On
O
Blinking
On
O
Blinking
On
O
Connection established
Connection is not established
Connection being established
Connection established
Connection is not established
Data is transferred over Ethernet
Ethernet connection is established
Ethernet connection is not established
• WAN connection is established
• Data is being transferred
• WAN connection is established
• No data is transferred
WAN connection is not established
• Wireless network mode is being activated
• Data is being transferred over WLAN
• Wireless network mode is active
• No data is being transferred over WLAN
• Wireless network mode is inactive
Meaning
To Next Page
Loading...
