Huawei HG532e - Enabling or Disabling Wireless Network; Changing Wireless Network Name and Password

10
4.2 Enabling or Disabling the Wireless Network
Function
There are two methods for enabling or disabling the wireless network function.
Using the WLAN Button
To enable or disable the wireless network function, press the WLAN button on
the side panel of the HG532e. The WLAN indicator indicates the status of
the wireless network function.
Using the Web-based Configuration Utility
To enable or disable the wireless network function from the web-based
configuration utility:
Step 1 Log in to the web-based configuration utility.
Step 2 Choose Basic > WLAN.
Step 3 Click the WLAN tab.
Step 4 Select Enable WLAN.
 Select Enable WLAN to enable the wireless network function.
 Clear Enable WLAN to disable the wireless network function.
4.3 Changing the Wireless Network Name and
Password
The default wireless network encryption mode is WPA-PSK/WPA2-PSK. You
can find the wireless network name (SSID) and password (WLAN Key) printed
on the label on the HG532e's rear panel.
To change the wireless network name and its password:
(This example uses WPA-PSK/WPA2-PSK encryption mode.)
Step 1 Log in to the web-based configuration utility.
Step 2 Choose Basic > WLAN.
Step 3 Click the WLAN tab.