Huawei HG532e - Setting Network Access Parameters; Logging into the Web Configuration Utility

3
2 Setting Network Access Parameters
2.1 Logging in to the Web-based Configuration
Utility
Most parameters of the HG532e are preset before delivery to meet common
application scenarios at homes. To check the HG532e's working status or to
configure certain advanced network functions, use the web-based configuration
utility.
To log in to the web-based configuration utility:
Step 1 Launch a browser on your computer. Enter http://192.168.1.1 in the
address box, and press Enter.
Step 2 On the login page, enter your user name (default is user) and
password (default is user).
 For security, you can change the user name and password for
login. For details, see section 4.1 "Changing the User Name and
Password for the Web-based Configuration Utility“.
 If the user name and password have been changed, use the
correct user name and password for login.
Step 3 Click Login.
After verification, the web-based configuration utility is displayed.
The first time you log in to the web-based configuration utility, a
configuration wizard is displayed. To skip the wizard and further
configure your HG532e, click Here when the following message
displays: Click Here to enter the advanced configuration page.