WLAN On
The WLAN connection is set up, but no data is
being transmitted.
Blinking
The WLAN connection is set up, and data is
being transmitted.
Off
The wireless function is disabled, or the WLAN
module is faulty.
WPS Blinking
The HG532e is connecting to a wireless client
such as a computer installed with a wireless
network adapter using the WPS function.
This process lasts no longer than 120 seconds.
On
A wireless connection is set up between the
HG532e and a wireless client using the WPS
function.
The WPS indicator is on for about 300
seconds, and then turns off.
Off The WPS function is disabled or faulty.
LAN1 to
LAN4
On The HG532e is connected to a device properly.
Blinking
Data is being transmitted between the HG532e
and the device connected.
Off No connection is set up on the port.
To Next Page
Loading...
