1
1 Product Overview
Ports and Buttons
No. Item Description
1 ADSL Connects to a DSL filter or phone socket.
2
LAN1 ～ LAN4
Connects to Ethernet devices, such as computers, set-top boxes
(STBs), and switches.
3 USB
Connects to a USB device.
If you connect a USB device to the HG532f, verify that the
input voltage and current of the USB device does not
exceed 5 V/1 A. Otherwise, the HG532f may malfunction.
4 Reset
Restores the HG532f to its default settings after you press and
hold this button for 6 seconds or more while the HG532f is
powered on.
A reset will result in all custom data and settings being lost.
Use with caution.
5 On/Off Powers the HG532f on or off.
6 Power Connects to a power adapter.
7 WPS Starts Wi-Fi protected setup (WPS) negotiation.
8 WLAN Enables or disables the WLAN function.
To Next Page
Loading...
