Huawei LUNA2000 Series - Connecting Internal Signal Cables

LUNA2000-(5-30)-S0
User Manual
5 Electrical Connection
Issue 01 (2020-09-18)
Copyright © Huawei Technologies Co., Ltd.
49
Figure 5-3 DC power cable connection inside the battery
The DC terminals between the power control module and the battery expansion modules use the DC
connection cable (Amphenol terminal) delivered with the battery.
After the positive and negative connectors snap into place, pull the DC input power cables
back to ensure that they are connected securely.
----End
5.2.3 Connecting Internal Signal Cables
Connecting Signal Cables Between the Power Control Module and Battery
Expansion Modules
Connect the communications terminals of the power control module and battery expansion
modules in sequence and secure them using cable clips.