LUNA2000-(5-30)-S0
User Manual
Copyright © Huawei Technologies Co., Ltd.
6.3 Battery Commissioning
Download and install the FusionSolar app.
Download and install the FusionSolar app of the latest version by referring to the quick
guide for the corresponding inverter model or the FusionSolar App Quick Guide. Then
register the installer and create a PV plant and owner (skip this step if the account has been
created). You can obtain the FusionSolar App Quick Guide by scanning the following QR
code.
Figure 6-1 FusionSolar App Quick Guide
6.3.1 Battery Deployment
Function
Add a battery and set the working mode on the quick settings screen of the inverter.
(Optional) Upgrading the Inverter and Smart Dongle
When the app connects to the inverter, a message is displayed, asking you to upgrade the
inverter version. Smart Dongle V100R001C00SPC117 and later versions support LUNA2000
battery. But the Smart Dongle cannot be upgraded locally. You need to perform the upgrade
through the management system. The operation procedure will be updated later.
Quick Settings
Step 1 Log in to the FusionSolar app using the installer's account. Tap Quick Settings on the home
screen to add the battery and set the battery working mode. The battery working mode is set
to Maximum self-consumption by default. Tap ? to view the details. View the detailed
settings and select a working mode by referring to 3 Application Scenarios and Settings.
To Next Page
Loading...
