Huawei LUNA2000 Series - Installing a PE Cable

LUNA2000-(5-30)-S0
User Manual
5 Electrical Connection
Issue 01 (2020-09-18)
Copyright © Huawei Technologies Co., Ltd.
51
Figure 5-5 Routing cables out of the cable hole
Before connecting external cables, route the cables through the cable hole to avoid
disconnecting after installation.
5.3.1 Installing a PE Cable
Precautions

Ensure that the PE cable is securely connected. Otherwise, electric shocks may occur.

It is recommended that silica gel or paint be used around the ground terminal after the PE cable is
connected.
Procedure
Step 1 Crimp an OT terminal.