Huawei LUNA2000 Series - System Power-On

LUNA2000-(5-30)-S0
User Manual
6 System Commissioning
Issue 01 (2020-09-18)
Copyright © Huawei Technologies Co., Ltd.
62
6.2 System Power-On
After turning on the battery switch, power on the inverter. For details about how to power on
the inverter, see the quick guide for the corresponding inverter model.
If no PV module is configured, press the black start button first.
Turn on the DC switch on the battery. After the battery is installed and powered on for the
first time, the ring LED blinks for three circles. Touch the LED and observe the battery
indicator to check the running status.
LED Indicators
Table 6-2 LED indicators
Category
Status (Blinking at Long
Intervals: On for 1s and then
Off for 1s; Blinking at Short
Intervals: On for 0.2s and then
Off for 0.2s)
Description
Running indicator
N/A
Steady green
Steady green
Operating mode
Blinking
green slowly
Blinking green
slowly
Standby mode
Off
Off
Hibernation mode
Blinking red
fast
N/A
Power control module environment alarm
N/A
Blinking red fast
Battery expansion module environment alarm
Steady red
N/A
The power control module is faulty.
N/A
Steady red
The battery expansion module is faulty.
Steady red
Steady red
Faulty
Battery system
indicator
N/A
Green after touching
Battery level. Each bar indicates 10%.
Steady red
The first three bars indicate the number of
faulty battery expansion modules.