LUNA2000-(5-30)-S0
User Manual
Copyright © Huawei Technologies Co., Ltd.
Avoid scratching the core wire when stripping a cable.
The cavity formed after the conductor crimp strip of the OT terminal is crimped must wrap
the core wires completely. The core wires must contact the OT terminal closely.
Wrap the wire crimping area with heat shrink tubing or insulation tape. The heat shrink
tubing is used as an example.
When using a heat gun, protect the equipment from being scorched.
Figure 5-6 Crimping an OT terminal
Step 2 Ground the PE cable.
To Next Page
Loading...
