Huawei LUNA2000 Series - Page 74

LUNA2000-(5-30)-S0
User Manual
6 System Commissioning
Issue 01 (2020-09-18)
Copyright © Huawei Technologies Co., Ltd.
68
Figure 6-6 Forced charge and discharge
Table 6-3 Description of forced charge/discharge parameters
Parameter
Description
Value Range
Charge/discharge
Specifies whether to charge
or discharge the battery.

Stop

Charge

Discharge
Charge/Discharge power
(kW)
Specifies the forced
charge/discharge power.

Charge: [0, Maximum
charge power]

Discharge: [0, Maximum
discharge power]
Charge/Discharge setting
mode
Set the charge and discharge
mode.

Duration

Charged/Discharged
energy
Charge/Discharge duration
(min)
Sets the charge and
discharge duration.
[0, 1440]
Remaining charge/discharge
duration (min)
Indicates the remaining
charge and discharge
duration. This parameter
cannot be set.
-
Charged/Discharged energy
(kWh)
Indicates the charged or
discharged battery level.
This parameter cannot be
set.
-
Charged/Discharged
duration (min)
Indicates the charged and
discharged duration. This
parameter cannot be set.
-