HUAWEI MC850/MC851 Media Phone User Guide 3 Preparations Before Use
15
To install an MMC, or a microSD card, do as follows:
Step 1
Open the SD/MMC cover on the rear panel of the media phone.
Step 2
Slide the MMC or microSD card in the corresponding card slot (the microSD
card needs to be inserted into a card holder before being slid in the card slot.)
To remove an MMC or a microSD card, push it in the slot and then release it. After the
card ejects, take it away. If you fail to take away the card barehanded after it ejects, use
a small tool such as tweezers.
3.5
Powering On the Media Phone
Connect the power adapter, and then press the power button on the rear panel of the
media phone, as shown in the following figure. When the power-on indicator is on, it
indicates that the media phone is powered on properly.
To Next Page
Loading...
Need help?
General
