Huawei ME906s LTE M.2 - GPS_DISABLE# Pin

HUAWEI ME906s LTE M.2 Module
Hardware Guide
Description of the Application Interfaces
Issue 05 (2019-03-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
31
Figure 3-13 Connections of the W_DISABLE# pin
It is recommended not to add a diode on the W_DISABLE# pin outside the module.
3.4.6 GPS_DISABLE# Pin
ME906s provides a hardware pin (GPS_DISABLE#) to disable or enable the GPS. In
addition, the GPS can also be enabled or disabled through software AT commands.
Table 3-7 Function of the GPS_DISABLE# pin
No.
GPS_DISABLE#
Function
1
Low
GPS function is disabled.
2
High
GPS function is determined by software AT
command. Default enabled.
3
Floating
GPS function is determined by software AT
command. Default enabled.
Figure 3-14 Connections of the GPS_DISABLE# pin
Module
(Modem)
BB Chip
1.8V
W_DISABLE#
VCC From Host
10 kΩ
Host
Module
(Modem)
BB Chip
1.8V
GPS_DISABLE#
VCC From Host
10 kΩ
Host