Figure 5-58 Installing an AC power module
Step 10 Insert the power cables.
l Secure the AC power cables with retention clips.
a. Press the locker of the retention clip outwards (as shown in a of step 1 in Figure
5-59), and meanwhile slide the retention clip to the connection part of the AC
power cable (as shown in b of step 1 in Figure 5-59).
Figure 5-59 Securing the AC power cables with retention clips
b. Loosen the retention clip, as shown in step 2 in Figure 5-59.
c. Press the retention clip inwards to secure the connection part of the AC power
cable, as shown in step 3 in Figure 5-59.
OceanStor Dorado V3 Series
Parts Replacement
5 Replacing FRUs
Issue 05 (2019-01-30) Copyright © Huawei Technologies Co., Ltd. 137
To Next Page
Loading...
