7.8 Adding a Remote Replication Pair
This operation enables you to add a remote replication pair to a consistency group. This
ensures that the data of secondary resource of added pair is consistent with that of other pairs
in the group at the same point in time.
7.9 Removing a Remote Replication Pair
This operation enables you to remove a remote replication pair from a consistency group.
Data of secondary resource of a removed remote replication will not be consistent with data of
secondary resources of other remote replication pairs in the consistency group in terms of
synchronization point in time.
7.10 Deleting a Consistency Group
This operation enables you to delete an unwanted consistency group.
7.1 Viewing Consistency Group Information
This operation enables you to view information about existing consistency groups, including
basic information and remote replication pair information, so that you can effectively monitor
the status of consistency groups.
Context
l On the consistency group management page, you can click Refresh to refresh
consistency group information.
l On the consistency group management page, you can click Keyword and enter
keywords to search for the desired consistency group information.
l On the consistency group management page, you can click
and select the information
items you want to view.
Procedure
Step 1 Log in to DeviceManager.
Step 2 Choose Data Protection > Remote Replication > Remote Replication
Consistency Group.
Step 3 View basic information about existing consistency groups. Table 7-1 describes the related
parameters.
Table 7-1 Parameters of Consistency Group
Parameter
Description
Name Name of a consistency group.
ID ID of a consistency group.
OceanStor V3 Series
Remote Replication Feature Guide for Block
7 Managing Consistency Groups
Issue 06 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
123
To Next Page
Loading...
Need help?
General
