Huawei OceanStor V3 Series - 8.2 Modifying Remote Device Information

Parameter Description Setting
Local Controller Owning controller of the
local storage device.
[Example]
CTE0.A
Local Port Ethernet port of the local
storage device.
[Example]
CTE0.A.H0
Local IQN iSCSI qualified name of the
local storage device. It is
used to identify the iSCSI
initiator name.
[Example]
iqn.
2006-08.com.huawei:oceans
tor:21008038bc14XXXX::0
Remote IP Address IP address of the Ethernet
port of the remote storage
device.
[Example]
192.168.26.12
Remote IQN iSCSI qualified name of the
remote storage device. It is
used to identify the iSCSI
initiator name.
[Example]
iqn.
2006-08.com.huawei:oceans
tor:2100643e8c45XXXX::
20000:X.X.X.X
Bandwidth Limit Whether or not to limit the
data transfer rate of a link.
[Example]
Yes
Bandwidth Maximum data transfer rate
of a link.
[Example]
--
Bandwidth Usage (%) Usage of the link
bandwidth.
[Example]
--
----End
8.2 Modifying Remote Device Information
This operation enables you to change the information of a replicated remote device.
Procedure
Step 1 Log in to DeviceManager.
Step 2 Choose Data Protection > Remote Device.
Step 3 Select a replicated remote device and click Modify.
The Modify dialog box is displayed.
Step 4 Modify information of the remote device.
1. Modify the authentication information, and enter the username and password of the
remote device.
OceanStor V3 Series
Remote Replication Feature Guide for Block
8 Managing Remote Devices
Issue 06 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
149