Parameter Description Setting
Synchronization
Method
Mode of data synchronization of the consistency
group. The values include:
l Manual: Synchronization is performed
manually.
l Timed wait after synchronization begins:
The system starts timing as soon as the latest
synchronization begins. When the time
specified in Interval has elapsed, the system
automatically starts to synchronize data
between the primary resource and secondary
resource again.
NOTE
If the latest synchronization is still being executed
after the time specified in Interval has elapsed,
the data synchronization will start after the latest
synchronization finishes.
l Timed wait after synchronization ends:
The system starts timing as soon as a
synchronization ends. When the time
specified in Interval has elapsed, the system
starts to synchronize data again.
NOTE
This parameter is available only when Replication
Mode is set to Asynchronous.
[Example]
Manual
Interval Waiting time for the two synchronization
methods, Timed wait after synchronization
begins and Timed wait after synchronization
ends.
NOTE
This parameter is available only when
Synchronization Method is set to Timed wait after
synchronization begins or Timed wait after
synchronization ends.
[Value range]
l Integer from 1 to
1440 (minutes)
l Integer from 10
to 59 (seconds)
[Example]
50 minutes
OceanStor V3 Series
Remote Replication Feature Guide for Block
7 Managing Consistency Groups
Issue 06 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
134
To Next Page
Loading...
