Huawei OptiX RTN 950A - Installing the RTN 950 A; Installing the Chassis in the 19-Inch Cabinet; Fixing Floating Nuts; Removing Screws

11
1
Installing the Chassis in the 19-Inch Cabinet
Installation hole
Store the removed screws properly for installing PGND cables.
When tightening floating nuts, ensure a minimum of 25 mm space on the left and right sides of the RTN
950A for ventilation.
Floating nut
Fixing Floating Nuts
a
Removing Screws
b
Installing the RTN 950A
NOTE
NOTE