Huawei OptiX RTN 950A - Configuring NE Data (Using the USB Flash Drive); Insert a USB Flash Drive

38
Configuring NE Data (Using the USB Flash Drive)
The USB flash drive loads software, system parameters, and scripts for commissioning a newly
deployed site.
Insert a USB flash drive.
For the functions, working principles, and types of USB flash drives supported, see the IDU Hardware
Description.
For a description of the indicators on the USB flash drive, see the Commissioning Guide.
Normally, after data is loaded from the USB flash drive to the OptiX RTN 950A, the USB port status indicator
should be on (green).
USB port status indicator