No. Indicator Identifier Status Description
Blinking green The system is operating
properly.
Red After registering, the
system does not operate
properly, or a power alarm,
fan alarm, or temperature
alarm is generated.
4 Mode
indicator
- Off The service interface
indicator is in the default
mode (STAT).
Green The service interface
indicator indicates the
interface speed. After 45
seconds, the service
interface indicator
automatically restores to
off.
Orange
The service interface
indicator indicates the PoE
status. After 45 seconds,
the service interface
indicator automatically
restores to off.
As shown in Figure 2-6, the S2700 has a mode switching button (5). You can press the mode
switching button to change the display mode of the mode indicator. The status of the mode
indicator represents the display mode of the related interface indicator. For example, when you
press the mode switching button once on S2700-9TP-PWR-EI, the mode indicator turns green
and the related interface indicator enters the speed state. When you press the mode switching
button for a second time, the mode indicator turns orange and the related interface indicator
represents the PoE power status. When you press the mode switching button for a third time,
the mode indicator restores to the default state (off). If you do not press the mode switching
button within 45 seconds, the mode indicator automatically restores to off.
The following table describes the meanings of indicators.
Table 2-7 Description of indicators in different modes
Display Mode
Status Description
STAT Off The interface is not connected or
has been shut down.
Green The interface is connected.
Blinking green The interface is sending or
receiving data.
Quidway S2700&S3700&S5700&S6700 Series Ethernet
Switches
Quick Start 2 Product Hardware Introduction
Issue 01 (2011-10-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
16
To Next Page
Loading...
