Huawei Quidway S2700 series - S5700 Indicator Description

Display Mode Status Description
Green The device is a not a command
switch:
l If the indicator of an interface
is always on, the number of
this interface is the stack ID of
the device.
l If the first nine interface
indicators of the device are
always on, the stack ID of the
device is 0.
Blinking green
The device is a command switch:
l If the indicator of an interface
blinks, the number of this
interface is the stack ID of the
device.
l If the first nine interface
indicators of the device blink,
the stack ID of the device is 0.
2.7 S5700 Indicator Description
This section describes the indicators on the S5700 front panel.
Indicators of a Non-PoE S5700
S5700-24TP-SI-AC, S5700-24TP-SI-DC, S5700-48TP-SI-AC, S5700-48TP-SI-DC and
S5700-6TP-LI-AC are non-PoE switches, and each of them has a single power supply unit.
NOTE
Only S5700-24TP-SI-AC, S5700-24TP-SI-DC, S5700-48TP-SI-AC and S5700-48TP-SI-DC have
redundancy power supply (RPS) indicators.
Figure 2-10 S5700-24TP-SI-AC indicators
2
3
4
5
1
Quidway S2700&S3700&S5700&S6700 Series Ethernet
Switches
Quick Start 2 Product Hardware Introduction
Issue 01 (2011-10-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
24