Huawei Quidway S2700 series - Logging in to the Web System Client

vlan 1
description admin_VLAN
#
interface Vlanif1
ip address 10.10.10.10 255.255.255.0
#
interface GigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 1
#
aaa
local-user huawei password simple huawei
local-user huawei service-type telnet
local-user huawei privilege level 15
authentication-scheme default
#
authorization-scheme default
#
accounting-scheme default
#
domain default
#
user-interface con 0
user-interface vty 0 4
authentication-mode aaa
#
return
5.3 Logging In to the Web System Client
Before configuring the switch, you must log in to the Web system client.
Context
l Before logging in to the Web system client, ensure that the switch has been commissioned
and the Web system server is enabled on the switch.
l The Web system client connects to the switch through HTTP; therefore, you must log in
to the Web system client through HTTP.
l The Web system client supports the Microsoft Internet Explorer 6 (IE6) and Firefox 3.0,
or later versions. The Web system client described in this document uses the IE6.
Procedure
Step 1 Open Microsoft Internet Explorer 6.0 on the client.
Step 2 Enter the universal resource locator (URL) of the Web system client in the address bar and press
Enter. The User Login dialog box is displayed, as shown in Figure 5-6.
The URL is in the format http://IP/view/login.html, for example, http://10.164.19.131/view/
login.html.
Quidway S2700&S3700&S5700&S6700 Series Ethernet
Switches
Quick Start 5 Logging in to the Device
Issue 01 (2011-10-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
53