Huawei Quidway S2700 series - Logging in to the Switch through the Console Interface

5.1 Logging In to the Switch Through the Console Interface
Context
When establishing the configuration environment through the console interface, you can log in
to the S2700/3700/5700/6700 through the HyperTerminal in Windows.
Procedure
Step 1 Start the HyperTerminal.
Choose Start > All Program > Accessories > Communications > HyperTerminal to start the
HyperTerminal in Windows XP.
Step 2 Set up a connection.
See Figure 5-1. Enter the name of the new connection in the Name text box and then choose
one icon. Then, click OK.
Figure 5-1 Setting up a connection
Step 3 Configure an interface for connection.
In the Connect To dialog box, as shown in Figure 5-2, select an interface from the drop-down
list box according to the actual interface on the PC or terminal. Next, click OK.
Quidway S2700&S3700&S5700&S6700 Series Ethernet
Switches
Quick Start 5 Logging in to the Device
Issue 01 (2011-10-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
47