Display Mode Status Description
Blinking green
l The power of the powered
device (PD) exceeds the power
supply capability of the port or
exceeds the threshold.
Stack Off The stack ID of the member
switch is not the number of the
interface in the off state.
Green The device is a not a command
switch:
l If the indicator of an interface
is always on, the number of this
interface is the stack ID of the
device.
l If the first nine interface
indicators of the device are
always on, the stack ID of the
device is 0.
Blinking green
The device is a command switch:
l If the indicator of an interface
blinks, the number of this
interface is the stack ID of the
device.
l If the first nine interface
indicators of the device blink,
the stack ID of the device is 0.
2.8 S6700 Indicator Description
This section describes the indicators on the S6700 front panel.
Indicators of S6700 Switch
In the following description, the indicators of S6700-24-EI are described as an example.
Figure 2-14 S6700-24-EI indicators
Quidway S2700&S3700&S5700&S6700 Series Ethernet
Switches
Quick Start 2 Product Hardware Introduction
Issue 01 (2011-10-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
34
To Next Page
Loading...
