EasyManua.ls Logo

Huawei Quidway S5328C-EI

Huawei Quidway S5328C-EI
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Configuration Roadmap
The configuration roadmap is as follows:
l Log in to S-switch-A through the console interface.
l Set the device name.
l Configure a management VLAN.
l On S-switch-A, set the type of the interface that connects S-switch-A and S-switch-B to
trunk. Add the interface to the management VLAN in trunk mode.
l Configure the management IP address of S-switch-A.
l Configure the Telnet service.
Data Preparation
To complete the configuration, you need the following data:
l ID of the management VLAN
l Management IP address of S-switch-A
l Number of the interface that connects S-switch-A and S-switch-B on S-switch-A
l Authentication mode, user name, and password
Configuration Procedure
1. Log in to S-switch-A through the console interface.
2. Set the device name of S-switch-A.
<Quidway> system-view
[Quidway] sysname S-switch-A
3. Configure a management VLAN.
[S-switch-A] vlan 1
[S-switch-A-vlan1] description admin_VLAN
4. On S-switch-A, set the type of the interface that connects S-switch-A and S-switch-B to
trunk. Add the interface to the management VLAN in trunk mode.
[S-switch-A] interface GigabitEthernet 0/0/24
[S-switch-A-GigabitEthernet0/0/24] undo port default vlan
[S-switch-A-GigabitEthernet0/0/24] port link-type trunk
[S-switch-A-GigabitEthernet0/0/24] port trunk allow-pass vlan 1
[S-switch-A-GigabitEthernet0/0/24] quit
5. Configure the management IP address of S-switch-A.
[S-switch-A] interface vlanif 1
[S-switch-A-Vlanif1] ip address 10.10.10.10 255.255.255.0
[S-switch-A-Vlanif1] quit
6. Configure the Telnet service. Adopt the AAA authentication mode, with the user name of
huawei and the password of huawei.
[S-switch-A] aaa
[S-switch-A-aaa] local-user huawei password simple huawei
[S-switch-A-aaa] local-user huawei service-type telnet
[S-switch-A-aaa] local-user huawei level 15
[S-switch-A-aaa] quit
[S-switch-A] user-interface vty 0 4
[S-switch-A-ui-vty0-4] authentication-mode aaa
[S-switch-A-ui-vty0-4] quit
[S-switch-A]
1 Quick Start
Quidway S5300 Series Ethernet Switches
Quick Start
1-4 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 01 (2008-12-26)

Table of Contents

Other manuals for Huawei Quidway S5328C-EI

Related product manuals