RRU3269
Installation Guide
3 Information About the Installation
Issue Draft B (2018-05-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 3-3 Ports on the RRU panels
Table 3-1 describes ports and indicators on the RRU panels.
Table 3-1 Ports and indicators on the RRU panels
TX port A (4.3-10 straight connector),
supporting RET signal transmission
TX port B (4.3-10 straight connector)
Alarm monitoring port used for monitoring
one RS485 signal and two dry contact
signals
Communication port for the RET antenna,
supporting RET signal transmission
(2) Ports in the
cabling cavity
Power supply socket, For details about RRU
power cable appearance and specifications,
see RRU Power Cable.
Optical/electrical port 0, connected to the
BBU or an upper-level RRU