No
.
Indic
ator
Name Color Statu
s
Description
Yellow Stead
y on
The switch has copied all the required
les and completed the le check.
The USB ash drive can be removed
from the switch.
Red Blinki
ng
An error has occurred when the
system is executing the conguration
le or reading data from the USB
ash drive.
Table 5-54 Description of service port indicators in dierent modes
Display Mode Color Status Description
Default mode - O The port is not connected or has
been shut down.
Green Steady
on
A link has been established on
the port.
Green or
yellow
Blinking The port is sending or receiving
data.
Speed - O The port is not connected or has
been shut down.
Green Steady
on
10M/100M/1000M port: The port
is operating at 10/100 Mbit/s.
1000M/10GE port: The port is
operating at 1000 Mbit/s.
Green Blinking 10M/100M/1000M port: The port
is operating at 1000 Mbit/s.
1000M/10GE port: The port is
operating at 10 Gbit/s.
PoE - O The port is not providing power
to a PD.
Green Steady
on
The port is providing power to a
PD.
Yellow Steady
on
The PoE function is disabled on
the port.
Yellow Blinking The port stops providing PoE
power because of an exception
(for example, an incompatible PD
is connected to the port).
S1700 Managed Series Ethernet Switches
Product Description
5 Hardware Structure
Issue 18 (2020-10-23) Copyright © Huawei Technologies Co., Ltd. 144
To Next Page
Loading...
Need help?
General