No
.
Indic
ator
Name Color Statu
s
Description
8 USB USB-
based
deploym
ent
indicator
- O ● No USB ash drive is connected to
the switch.
● The USB port is damaged.
● The indicator is damaged.
● The USB ash drive does not have
any conguration le and cannot
be used for deployment.
● The switch has been upgraded
using the USB
ash drive and is
restarting.
Green Stead
y on
A USB-based deployment has been
completed.
Green Blinki
ng
The system is reading data from a
USB ash drive.
Yellow Stead
y on
The switch has copied all the required
les and completed the le check.
The USB ash drive can be removed
from the switch.
Red Blinki
ng
An error has occurred when the
system is executing the conguration
le or reading data from the USB
ash drive.
Table 5-82 Description of service port indicators in dierent modes
Display Mode Color Status Description
Default mode - O The port is not connected or has
been shut down.
Green Steady
on
A link has been established on
the port.
Green Blinking The port is sending or receiving
data.
Speed - O The port is not connected or has
been shut down.
Green Steady
on
10M/100M/1000M port: The port
is operating at 10/100 Mbit/s.
Green Blinking 10M/100M/1000M port: The port
is operating at 1000 Mbit/s.
S1700 Managed Series Ethernet Switches
Product Description
5 Hardware Structure
Issue 18 (2020-10-23) Copyright © Huawei Technologies Co., Ltd. 177
To Next Page
Loading...
Need help?
General