Figure 7-17 Power adjustment parameters
Table 7-8 Power adjustment parameters
Parameter
Description
Remote power schedule If this parameter is set to Enable, the solar inverter responds
to the remote power scheduling command. If it is set to
Disable, the solar inverter does not respond to the command.
Schedule instruction valid
duration (s)
Adjusts the time for maintaining the scheduling command.
Maximum active power (kW) Species the output upper threshold for the maximum active
power to adapt to dierent market requirements.
SUN2000-(100KTL, 110KTL, 125KTL) Series
User Manual 7 Man-Machine Interactions
Issue 07 (2020-09-15) Copyright © Huawei Technologies Co., Ltd. 95
To Next Page
Loading...
Need help?
General