4.5 Installing a Solar Inverter
Context
● Move the solar inverter with care to prevent device damage and personal
injury.
● It takes multiple persons or a pallet truck to move the solar inverter.
● Do not use the ports and wiring terminals at the bottom to support any weight
of the solar inverter.
● When you need to temporally place the solar inverter on the ground, use foam,
paper, or other protection material to prevent damage to its cover.
● Use the handles to facilitate installation. Handles are optional and delivered
separately. Ensure that the handles are securely installed. After the installation
is complete, remove the handles and keep them properly.
● To avoid damage to the equipment, do not lift or hoist a solar inverter with an
improper hold as shown in Figure 4-13.
Figure 4-12 Positions for installing the handles
(A) Transportation scenario
(B) Installation scenario
SUN2000-(100KTL, 110KTL, 125KTL) Series
User Manual 4 Installation
Issue 07 (2020-09-15) Copyright © Huawei Technologies Co., Ltd. 34
To Next Page
Loading...
Need help?
General