4 Installation
4.1 Check Before Installation
Checking Outer Packing Materials
Before unpacking the solar inverter, check the outer packing materials for damage,
such as holes and cracks, and check the solar inverter model. If any damage is
found or the solar inverter model is not what you requested, do not unpack the
package and contact your supplier as soon as possible.
You are advised to remove the packing materials within 24 hours before installing the solar
inverter.
Checking Accessories
After unpacking the solar inverter, check that the components are intact and
complete. If any damage is found or any component is missing, contact your
dealer.
For details about the number of accessories delivered with the solar inverter, see the
Packing List
in the packing case.
SUN2000-(100KTL, 110KTL, 125KTL) Series
User Manual 4 Installation
Issue 07 (2020-09-15) Copyright © Huawei Technologies Co., Ltd. 24
To Next Page
Loading...
Need help?
General