temperature is not higher than the external ambient temperature during
operation.
● You are advised to install the inverter in a sheltered place or install an awning
over it.
● The inverter will be corroded in salt areas. Before installing the inverter
outdoors in salt areas, consult Huawei. A salt area refers to the region within
500 meters from the coast or prone to sea breeze. The regions prone to sea
breeze vary with weather conditions (such as typhoons and monsoons) or
terrains (such as dams and hills).
The SUN2000-125KTL-M0 should be physically separated from third-party
wirelesscommunication facilities and residential environments by distance greater than 30
m.
Figure 4-1 Installation environment
Mounting Structure Requirements
● The mounting structure where the solar inverter is installed must be re
resistant. Do not install the solar inverter on ammable building materials.
● Ensure that the installation surface is solid enough to bear the solar inverter.
● In residential areas, do not install the solar inverter on drywalls or walls made
of similar materials with a weak sound insulation performance because the
noise generated by the solar inverter may interfere with residents.
SUN2000-(100KTL, 110KTL, 125KTL) Series
User Manual 4 Installation
Issue 07 (2020-09-15) Copyright © Huawei Technologies Co., Ltd. 27
To Next Page
Loading...
Need help?
General