Figure 5-22 Connecting Y-branch connectors to the solar inverter with a safe
distance (recommended)
Figure 5-23
Connecting Y-branch connectors to the solar inverter
Specication Requirements
Cables with high rigidity, such as armored cables, are not recommended, because
poor contact may be caused by the bending of cables.
Use the Staubli MC4 connectors delivered with the solar inverter. If the PV
connectors are lost or damaged, purchase the connectors of the same model. The
device damage caused by incompatible PV connectors is beyond the warranty
scope.
SUN2000-(100KTL, 110KTL, 125KTL) Series
User Manual 5 Electrical Connections
Issue 07 (2020-09-15) Copyright © Huawei Technologies Co., Ltd. 64
To Next Page
Loading...
