Huawei SUN2000-20KTL - Page 88

SUN2000 (8KTL-28KTL)
User Manual
7 LCD
Issue 07 (2014-07-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
82
Procedure

The following table describes the procedure for setting the display language. The
parameter values in the figures are for reference only.
LCD
Operation Procedure
1. On the default page, press to enter the
main menu.
2. Choose and press .
3. Enter the user name and password by
pressing or , and press .
NOTE

The selectable user names are Common User
or Advanced User. The initial password for
Common User and Advanced User is 000001.
If you forget the password, contact Huawei
technical support for a dynamic password that is
effective only on the current day. Change the
password after login.

After the authentication is successful, the
system keeps the authentication information for
30 seconds. If you exit from the Settings page
and log in again within 30 seconds, no
authentication is required.
Log in to the SUN2000 as Advanced
4. Choose User Param., and press .