Ensure that the WLAN antenna is installed securely.
Figure 5-6 Installing a WLAN antenna
----End
5.5 Connecting an AC Output Power Cable
Precautions
An AC switch must be installed on the AC side of the SUN2000 to ensure that the
SUN2000 can be safely disconnected from the power grid.
Do not connect loads between the SUN2000 and the AC switch.
Procedure
Step 1 Connect the AC output power cable to the AC connector.
SUN2000-(2KTL-6KTL)-L1
User Manual 5 Electrical Connection
Issue 03 (2020-09-15) Copyright © Huawei Technologies Co., Ltd. 39
To Next Page
Loading...
