Huawei SUN2000-(2KTL-6KTL)-L1 User Manual

Table 7-4 Description of the grid charge parameter
Parameter Description Value Range
Charge from
grid
ɲ ©ìàCharge from grid is enabled:
ț w¯Êì¯ììàăÝ²ìă²äǂɟ
lower than the End-of-
discharge capacity, the system
forcibly charges batteries from
the power grid. The charging
power is limited to 1 kW. When
ì¯ììàăÝ²ìă²äǂɟ¯²ª¯à
than End-of-discharge capacity,
the system stops charging
batteries from the power grid.
– Except the Maximum self-
consumption control mode, if
the PV power is less than the
preset charge power, the system
charges batteries from the power
grid. The charge power is limited
to 2 kW. When the battery
capacity is higher than Grid
charge ñìÑč SOC, the system
stops charging batteries from the
power grid.
ɲ fÑäìì¯²ä¯àªñìÑč capacity,
choose Maintenance > Add/Delete
device > Battery > End-of-
discharge capacity on the home
äàÊȇf¯üÃñàʪ²äǁǂɟț
ǂǀɟȀää¯ÑýÊ²ÊFigure 7-16.
ɲ /©Charge from grid function is
disabled by default, comply with
the grid charge requirements
stipulated in local laws and
regulations when this function is
enabled.
ɲ ²äÃ
ɲ ÊÃ
----End
7.2.2 AFCI
Function
If PV modules or cables are incorrectly connected or damaged, electric arcs may
be generated, which may cause Ēàȇ Huawei solar inverters provide arc detection
meets the requirement of UL 1699B-2018, ensuring the user safety and property.
SUN2000-(2KTL-6KTL)-L1
User Manual 7 Man-Machine Interaction
Issue 03 (2020-09-15) Copyright © Huawei Technologies Co., Ltd. 73

Huawei SUN2000-(2KTL-6KTL)-L1 Specifications

General

Brand	Huawei
Model	SUN2000-(2KTL-6KTL)-L1
Category	Inverter
Language	English