2
1. The anti-theft lock is prepared by the customer.
2. For details about how to wall-mount the device, see the SUN2000-(30KTL-A, 33KTL, 33KTL-
E001, 40KTL) User Manual.
1. Determine the hole positions on the support
based on rear panel dimensions.
2. Drill holes. (You are advised to apply anti-rust
paint on the hole positions for protection.)
4. Mount the inverter on the rear panel.
6. (Optional) Install an anti-theft lock.
M12
45 N·m
3. Secure the rear panel.
5. Tighten hexagon bolts.
Installing an Inverter (Support-mounting Used as an Example)
1.3
To Next Page
Loading...
