Huawei SUN2000-60KTL-M0 - Page 15

14
• When connecting the shielded cable, choose whether to crimp the OT terminal based on site
requirements.
• Tie the communication cables with the cables on internal side of the maintenance compartment.
NOTE
6. Tighten the thread-lock sealing nut and seal the cable gland.
1. Prepare an RJ45 connector.
2. Route the cable through the cable gland.
RJ45 Network Port Connection
No.
Color
Pin Definition
1
White
-and-
orange
RS485A, RS485
differential signal+
2
Orange
RS485B, RS485
differential signal
–
3
White
-and-green
N/A
4
Blue
RS485A, RS485
differential signal+
5
White
-and-blue
RS485B, RS485
differential signal
–
6
Green
N/A
7
White
-and-brown
N/A
8
Brown
N/A
3. Insert the RJ45 connector into the RJ45 network
port in the SUN2000 maintenance compartment.
4. Bind the communications cable.