Need help?Do you have a question about the Huawei SUN2000-6KTL-L1 and is the answer not in the manual?
General| Safety | EN/IEC 62109-1, EN/IEC 62109-2 |
|---|---|
| Efficiency | 98.4 % |
| Product type | - |
| Maximum power | 9000 W |
| Output current | 27.3 A |
| DC input voltage | 350 - 450 V |
| Number of phases | 1 |
| Output frequency | 50/60 Hz |
| Starting voltage | 100 V |
| Output power capacity (max) | 6 kVA |
| Input operation voltage (max) | 560 V |
| Input operation voltage (min) | 90 V |
| Output operation voltage (max) | 240 V |
| Output operation voltage (min) | 220 V |
| Operating temperature (T-T) | -25 - 60 °C |
| Operating relative humidity (H-H) | 0 - 100 % |
| Wi-Fi | Yes |
| Product color | White |
| Power protection features | Over current, Over voltage, Overheating, Reverse polarity, Short circuit |
| International Protection (IP) code | IP65 |
Weight and Dimensions| Width | 365 mm |
|---|---|
| Height | 156 mm |
| Weight | 12000 g |
Specifies spatial and angular requirements for installing the device correctly.
Provides step-by-step instructions for mounting the solar inverter onto its bracket.
Outlines required cable types, conductor sizes, and outer diameters for connection.
Details the procedure for connecting the protective earthing (PE) cable to the device.
Instructions for installing communication modules like WLAN antennas or Smart Dongles.
Step-by-step guide for connecting the AC output power cable to the inverter's AC connector.
Covers assembling DC connectors and connecting DC input power cables to the inverter.
Guidelines for connecting battery cables, emphasizing correct polarity to avoid damage.
Instructions for connecting signal cables, ensuring proper routing and shielding.
Explains the pinout and function of the COM port for communication.
Guide on obtaining and installing the necessary FusionSolar mobile application.
Procedure for creating a new installer account within the FusionSolar platform.
Steps to register a new PV plant and assign an owner in the system.
Process for configuring the physical layout of PV modules and optimizers in the app.
Configuration options for battery settings, including charge/discharge modes.
Addresses common issues and scenarios encountered during device commissioning.
Detailed steps for resetting the device's login password and initial setup.
To Next Page