Figure 4-11 Determining hole positions
Step 2 Drill holes using a hammer drill and install expansion bolts.
You need to prepare expansion bolts. M12x60 stainless steel expansion bolts are
recommended.
Figure 4-12 Drilling a hole and installing an expansion bolt
Avoid drilling holes in the utility pipes and/or cables attached to back of the wall.
SUN2000-(50KTL, 60KTL, 65KTL)-M0
User Manual 4 Installation
Issue 11 (2024-02-02) Copyright © Huawei Technologies Co., Ltd. 35
To Next Page
Loading...
