15
1. Install the SUN2000 onto the mounting bracket. 2. (Optional) Install an anti-theft lock.
Install SUN2000-(8KTL–20KTL)-M2
1.2
It is recommended that silica gel or paint be applied around the ground terminal after the PE
cable is connected.
Performing SUN2000-(8KTL–20KTL)-M2 Electrical Connections
1.3
Before connecting cables, ensure that the DC switch on the SUN2000 and all the switches
connected to the SUN2000 are set to OFF. Otherwise, the high voltage of the SUN2000 may result
in electric shocks.
1. Install the PE cable.
2. Connect the AC connector to the AC output port.
AC output port (AC)
To Next Page
Loading...
